How To Fix Grainy And Overcooked Fudge So It's Soft Again (2024)
Brian Udall
·2 min read
It's the holiday season, and you've made a batch of fudgefor friends and family, but you've just had a bite, and the texture is off. It tastes fine, except there's a graininess or a grittiness to the fudge that's unpleasant. Or, maybe the fudge is hard, brittle, and overcooked. The grittiness comes from sugar crystals that didn't dissolve into the fudge during the cooking process. Hard and overcooked fudge isn't great, either, but before you throw the whole pan out, try this simple trick.
For both problems, you'll need to melt the fudge back down to allow the sugar crystals to properly dissolve or to allow the overcooked fudge to soften up again. It may seem counterintuitive to cook overcooked fudge even more, but trust us, you just need to start the fudge over from scratch. Of course, if the fudge is burnt, that's a different problem, and cooking it again won't remove the burnt flavor. Grab the saucepan that you initially used to cook the fudge and toss the fudge back in along with 1 ½ cups of water and a splash of cream. Adding some cream of tartar is a helpful way to keep the sugar crystals at bay as well — it's not essential, but if you have some, definitely pour a little in. Bring the fudge to a boil slowly. You want the sugar to dissolve before it boils, so make sure the fudge is smooth before turning the heat up.
A great way to make sure your fudge is going to settle right is by using a candy thermometer. When bringing your fudge to a boil, check that the temperature reaches the ideal range of 237 to 239 F. That range will get you a pan of fudge that's in the Goldilocks zone of not too soft and not too hard. It will also help keep your fudge from becoming gritty since sugar crystals can form again if the fudge gets too hot. Overcooked fudge, which goes beyond 239 F, evaporates the water, which isn't what you want.
ADVERTIsem*nT
It also matters how you treat the fudge after it's cooked. Avoid too much stirring while you are heating the fudge since this agitates the sugar and causes it to clump into sugar crystals again. Once it's reached 237 F, allow the fudge to cool to 110 F, and don't stir the fudge at all while it's cooling. Less is more in this case. Other than these tips, treat the fudge like you normally would, and you'll have breathed new life into your winter treat.
To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves. Then bring the fudge back up to the temperature specified in the recipe and follow the remaining steps. The flavor may be slightly diluted, but the texture will be improved.
You have one option to make it soft, which is you have to put the fudge pieces in a plastic bag along with the paper towel or a bread slice.Secure the bag and leave it overnight, next day you will get a softened fudge.
The solution? A fudge do-over. Even though it set up properly, I threw it back into a saucepan with about 1 1/2 cups of water and gently heated the mixture to dissolve the fudge into the water. From there, I pretty much re-did the whole cooking process.
Scrape the fudge back into a large saucepan and add 1 1/2 cups of water.
Stir the fudge over low heat until it dissolves. ...
Increase the heat to medium and bring it to a boil, washing down the sides of the pan frequently with a wet pastry brush to prevent sugar crystals from forming.
Grab the saucepan that you initially used to cook the fudge and toss the fudge back in along with 1 ½ cups of water and a splash of cream. Adding some cream of tartar is a helpful way to keep the sugar crystals at bay as well — it's not essential, but if you have some, definitely pour a little in.
My advice to you is to just pour it in a jar, call it something else delicious, and pretend you meant for it to be that way. The nice thing about my “failed” fudge is that it tastes absolutely delicious! A spoonful of the delectable treat will make you want for more.
The sugars probably crystallized, a common mistake when making candy like fudge or caramel. If the melting sugar splashes onto the sides of the pan, it turns back into crystals and causes the fudge to seize up. To avoid this issue, swirl the pan instead of stirring it with a spoon.
termed in kitchen parlance the soft ball stage, that point between 234 and 240 °F (112 and 115 °C) at which a small ball of the candy dropped in ice water neither disintegrates nor flattens when picked up with the fingers.
Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.
Chewy fudge results from the excessive moisture present in the mixture, which means the fudge was not cooked to the right temperature and could not be cooked enough to release the moisture. However, take care not to overcook fudge because it will take away the moisture and leave you with hard, chewy candy.
This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool. Heat in 30-second bursts in the microwave, stirring well between each to ensure everything is melting evenly.
Put the fudge in a plastic bag add a piece of bread or a damp paper towel close the bag completely leave it overnight it will soften . For small amounts just heat at half power for ten seconds intervals until soft.
Harden the fudge: Place your container or tins in the fridge for 2 hours, which is the time it takes for the fudge to set. Once it's hardened, cut the fudge into 12 pieces or remove it from the muffin tins. Store in the fridge or the freezer (if you don't devour it right away).
How can you fix soft fudge? Put it in a microwave safe bowl that is large enough that it won't boil over. Reheat it to the boiling point and cook for about 3 more minutes. Then you can beat some powdered sugar into it if this doesn't make it set.
As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F). If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard.
The soft ball stage is the point when melted sugar is 236 degrees. Without a candy thermometer, you can achieve this with what is called a “cold water method”. Fill a small glass with ice and cover it with water until it is ice cold..Drop your hot sugar syrup into the ice water.
Introduction: My name is Patricia Veum II, I am a vast, combative, smiling, famous, inexpensive, zealous, sparkling person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
