No Fail Fudge Recipe (2024)

FAQs

What is the key to successful non grainy fudge? ›

The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Use Evaporated Milk- Make sure to use evaporated milk and not sweetened condensed milk. If you accidentally use sweetened condensed milk your fudge will be incredibly over the top sweet. Cut up the Butter– Before adding the butter in make sure to cut it into smaller pieces for faster melting.

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

Candy that isn't cooked long enough will end up too soft; overcooking makes fudge crumbly or hard. High-quality fudge has many small crystals. If the process of crystallization begins too early, fewer crystals form and they become much larger.

If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.

OPTION 4) If you think the reason it didn't set was because you didn't heat it to the right temperature, you could try putting it back into the pan and re-cooking.

Overcooking or Undercooking:Solution: Cooking the fudge for too long or too short a time can affect its texture. Follow the recipe instructions closely and use a timer to avoid overcooking.

Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. Use a candy thermometer or conduct a cold water test to check if the fudge is done.

Why won't my condensed milk fudge set? ›

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

Secondly, the pot's material should allow for good heat distribution hence your top choice should be copper cookware or a pot with a copper core. Copper's exceptional heat conductivity offers unparalleled temperature control, an asset when working with finicky ingredients like sugar.

Evaporated milk has added sugar and carbohydrates which are very high, making sweetened condensed milk not healthy for nutritional intake for babies and children, Ali explained.

It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould. Another tip: Do not scrape the sides of the pan or the spoon used for stirring.

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

You didn't cook it long enough. Fudge needs to be heated to the "soft ball" stage. It is salvageable, but you'd have to be very careful of sugar crystallization. If you make a mistake you'll wind up with a grainy mess.

If the sugar crystals are not properly dissolved before cooling, they can create a gritty texture. To avoid this, ensure that you stir the fudge mixture consistently and remove any sugar crystals that form on the sides of the pan using a wet pastry brush.